Product Overview
Emperor 200 Half-Size mSATA SSD provides all the advantages of flash disk technology with the Serial ATA III interface and backward compatible to support SATAIII specification. Emperor 200 SSD module is based on JEDEC mSATA Mini (MO-300b Variation B) form factor. It is designed to operate at a maximum operating frequency of 300MHz with 40MHz external crystal.
Available capacity ranges from 32GB to 512GB, it delivers a performance of 530MB/s (Sequential Read) and 490MB/s (Sequential Write) throughput. The power consumption of mSATA module is much lower than traditional hard drive. Its small foot print is ideal for space constraint embedded systems.
Note: Only works with mSATA standard connector. NOT compatible with Mini PCIe slot for WWAN/Wifi cards
Contact support@mfactors.com for Optional Industrial Grade (-40°C to 85°C) Parts
Specifications
Part |
Emperor 200 Series |
Capacity |
32GB - 512GB |
NAND Flash |
Kioxia/Toshiba 3D NAND |
Form Factor |
50mm mSATA Mini (JEDEC MO300b variation B) |
Interface |
Serial ATA: SATA III (6G) |
Controller |
PS3111 |
Sequential Read |
Up to 500MB/s |
Sequential Write |
Up to 490MB/s |
Access Time |
0.1 ms |
Dimensions |
26.88 x 29.85 x 4mm |
Weight |
< 4.6g |
TRIM Support |
Yes |
SMART Support |
Yes |
NCQ |
Up to 32 commands |
Operation Temperature |
0 to 70°C |
Storage Temperature |
-40 to 85°C |
Operating Voltage |
3.3V ± 5% |
Humidity |
RH = 95% under 55°C |
Shock |
1500G/0.5ms |
Vibration |
80-2000Hz/20G |
Idle |
< 0.3W |
Active |
< 0.9W |
MTBF |
>2,000,000 hours |
Wear-leveling |
Static and dynamic wear-leveling |
ECC Scheme |
Built-in hardware ECC supports 72bit per 1K Byte data |
Compliance: |
RoHS / CE / FCC |
OS Support |
Windows 10 / 8.1 / 8 / 7 / Vista / XP / CE |