Product Overview
M300 M.2 2242 PCIe with NVMe interface is an ideal flash storage solution for embedded computing systems demanding highly reliable drives with advanced data security and lower power consumption without compromising performance. Monarch 300 can support up to 32 Flash Chip Enable (CE) delivering Sequential Read/Write of up to 1.2GB/1.1GB/s and Random Read/Write of 90K/135K (Burst) IOPS.
It is designed in compliance with the standard Next Generation Form Factor (NGFF) named M.2 Card Format, PCIe base 3.0 and NVMe 1.1 specifications. Other advanced features include End-to-End Data Path Protection, SmartRefresh, Smart Monitoring, Power Loss Data Protection and optional OPAL/Pyrite data security.
Product Specifications |
|
Brand |
M-Factors M300 |
Interface / Interface |
NVMe Gen3 X2 / M.2 2242 |
Capacity |
64GB ~ 512B |
NAND Flash |
BiSC3 Toshiba 3D TLC |
Performance |
Sequential: 1200 MB/s Read, 1100 MB/s Write IOPs (4K Random Write): Up to 135,000 |
MTBF |
2,000,000 hours |
Low Power Consumption (Active/Idle) |
5.0W/0.4W Support Power Saving Modes APST, ASPM, L1.2 |
ECC Engine |
StrongECC up to 330 bit/4KB |
Feature Support |
TRIM, SmartRefresh, Thermal Throttling, End-to-End Data Path Protection |
Security |
Security Erase, Firmware Enabled Power Loss Data Protection |
Optional Feature |
Industrial Temp -40°C ~ 85°C, pSLC with Higher Write Endurance, Over Provisioning, TCG OPAL |
Standard Temperature |
Operating: 0°C ~ 70°C Storage: -40°C ~ 85°C |
Environmental |
Humidity: 5% ~ 95% Shock: 1,500G/0.5ms Vibration: 80~2000Hz/20G |
Dimensions |
42 x 22 x 1.5mm |
Warranty |
Limited 3 Years |