Industrial Grade M.2 2242 SATA SSD (8GB - 512GB)

Write a Review
$0.00
SKU:
Emperor 300
Availability:
Contact 714.460.9844 or support@mfactors.com

Product Overview

The Industrial Grade Emperor M.2 SATA is an ideal flash storage solution for embedded computing systems demanding small form factor drives with advanced data security and protection without compromising performance and reliability. This Industrial Grade M.2 drive is an ideal solution for Tablets, UltraBooks, embedded systems, NUC and IPC.

Emperor 300 M.2 2242 SSD is fully compliant with the standard Next Generation Form Factor (NGFF) or M.2. with available capacity ranges from 8GB to 512GB. Based on Toshiba's 15 MLC and BiSC3 3D TLC NAND, Emperor 300 can deliver transfer speed of 550MB/s read and 490MB/s write. In addition, this extended temperature M.2 SSD provides lower power consumption in comparison to traditional hard drives.

Specifications

 

Series

 Emperor 300

Capacity

 8GB ~ 512GB

NAND Flash

 Toshiba 15nm MLC, BiSC3 3D NAND

Form Factor

 M.2 2242

Interface

 Serial ATA: SATA III (6G)

Controller

 PS3111

Sequential Read

 Up to 550MB/s

Sequential Write

 Up to 490MB/s

Dimensions

 22.00 x 42 x 3.8mm

Access Time

 0.1 ms

Operating Voltage

 3.3V ± 5%

Operation Temperature

 0°C to 70°C [Commercial Temp]; -40°C to 85°C [Industrial Temp]

Storage Temperature

 -40°C to 85°C

Idle

 < 0.3W

Active

 < 1.7W (Max for 512GB)

MTBF

 >2,000,000 hours

TRIM Support

 Yes

SMART Support

 Yes

Power Loss Protection

 Yes

Wear-leveling

 Static and dynamic wear-leveling

ECC Scheme

 Built-in hardware ECC supports 72bit per 1K Byte data

Power Saving Modes

 Support DIPM/HIPM Mode

Humidity

 RH = 95% under 55°C

Shock

 1500G/0.5ms

Vibration

 80-2000Hz/20G

Compliance:

 RoHS / CE / FCC / PCI Express Base 3.0

Other Features:

 SmartRefresh, SmartFlush, GuaranteeFlush