Currency Displayed in
Emperor 500 mSATA Solid State Drive
Emperor 500 is a mSATA solid state drive (SSD) designed with high performance and for embedded storage applications.
Emperor 500 mSATA SSD delivers all the advantages of Flash Disk technology with Serial ATA I/II/III interface and is fully compliant with the standard mSATA form factor, JEDEC MO-300. It is designed to run at a maximum operating frequency of 300MHz with 40MHz external crystal. Moreover, based on Micron MLC flash, Emperor 500 mSATA can reach up to 450MB/s read as well as 200MB/s write high performance.
Offering improved Read/Write performance, SMART technology, reliability, and low power consumption, Emperor 500 mSATA SSD is an ideal storage for embedded applications that have space constraints and require high performance.
**Please contact 714.460.9844 or email support@mfactors.com for Industrial Grade/SLC inquries**
HIGHLIGHTS
Item |
Specification |
||
Specification |
Interface |
SATA 6Gbps and 3Gbps, 1.5Gbps interface ONFI2.3 and ONFI 3.0 Interface support
|
|
Electrical | 3.3V (Operating Voltage) | ||
Form Factor |
mSATA MO-300 |
||
Size |
50.8*29.85*4.85 |
||
weight |
~8grams/0.02lbs |
||
Capacity |
120GB |
||
Performance |
Sequential write |
up to 200 MB/s |
|
Sequential Read |
up to 450 MB/s |
||
Power Dissipation |
Idle |
150mW |
|
Active |
1250mW | ||
Dependability |
TRIM |
support | |
NCQ |
support | ||
MTBF |
>1,000,000 hours |
||
S.M.A.R.T |
Support |
||
Bad-Block Management |
Advanced bad sector management algorithms |
||
Wear-leveling |
Static and dynamic wear-leveling algorithms |
||
ECC |
Built in hardware ECC circuit (up to 72bit/1KB) |
||
Environment |
Storage temperature |
-40~85℃ |
|
Operation temperature |
Standard |
0~70 ℃ |
|
|
|||
|
|||
Vibration |
80Hz~2000Hz/20G | ||
Shock |
1500G/0.5ms |
||
Humidity |
90% under 40C |
||
TBW |
Terabytes Written: 125TBW for 120GB |
RoHS Compliant |
Yes |
Warranty |
2 years |