Loading... Please wait...

Industrial 2.5" PATA SLC SSD with Secure Erase

Price:
Call or email us support@mfactors.com
SKU:
M8APXXX-SE/R
Brand:


Product Description

Industrial 2.5" SATA SSD with Secure Erase

Power Consumption +5 V ± 10%
Reading / Writing / Idle <mA / Max>
360 mA / 400 mA / 240 mA SLC
360 mA / 390 mA / 240 mA MLC
Capacity
8GB / 16GB / 32GB / 64GB / 128GB / (256GB availabe only for MLC)
Performance MB/sec
Sequential read : 114.2 for SLC; 107.8 for MLC
Sequential write : 97.4 for SLC; 82.4 for MLC
Average access time : 0.2ms (estimated)

Features

Standard 2.5” PATA (IDE) SSD form-factor
Standard 44 pins PATA (IDE) male connector
Data transfer mode support PIO 0~4 and UDMA 0~6
Extremely rugged metal casing to endure harsh Environments
Automatic 8 bits ECC and retry capabilities
Supports static wear-leveling algorithms
Supports Fast Erase by Hardware and Software definition
Supports Secure Erase by Software ATA command vendor code

 

Specifications

 

 Compatibility : ATA/ATAPI-7 and True IDE mode
Form-factor : Standard Rugged Metal 2.5” PATA (IDE) SSD
Host Interface : Standard 44 pins PATA (IDE) male connector
Data transfer rate : Data transfer mode support PIO 0~4 and UDMA 0~6
Environmental specification :
  Humidity : 10% ~ 95% non-condensing
  Acoustic noise : 0dB
  Vibration : 15G
  Shock : 1500G
Reliability :
  Wear-leveling : Static wear-leveling algorithms
  MTBF : > 3,000,000 hours
  Endurance : > 2,000,000 cycles logically contributed by static wear-leveling and advanced bad
  sector management algorithms
  ECC : Enhanced management 8-bits per 512bytes block
  Data Data retention : 10 Years
Physical specification :
  Weight (max.) : 115 g ± 5 g / 4.06 oz.
  Dimension(W x L x H) : 69.90 x 99.70 x 9.50 (mm)
Warranty :
  3 years warranty for SLC standard grade
  5 years warranty for SLC industrial grade
  1 years warranty for MLC product
Conformal coating : Option for special request
Functionality :
  Hardware : Fast Erase or Secure Erase the media data by hardware trigger
  Software : Fast Erase or Secure Erase the media data by ATA command vender code
Sanitization Procedure :
  Default sanitizing by erase block data to 0xFF on file table for Fast Erase
  Sanitizing Based on NSA Manual 130-2 for Secure Erase
  Sanitizing Based on USA Air Force AFSSI 5020 for Secure Erase
  Sanitizing Based on DoD 5220.22-M for Secure Erase
  Sanitizing Based on IREC(IRIG)106 for Secure Erase
Hardware Jumper Setting for Secure Erase & Fast Erase :
Hardware Jumper Setting for Secure Erase & Fast Erase

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


You Recently Viewed...