Intergrating the CompactFlash card form factor and Serial ATA (SATA I & II) interface, CFAST executes much faster while keeping the small form factor and rigid case intact. AMP CFAST Card is designed and tested against vibration. The Sequential Read speed is 87.3MB/s and sequential Write speed is 49.6MB/s. This small form factor, high performance and durable storage is ideal for embedded and industrial applications.

• MLC-NAND type flash technology (SLC also available)
• RoHS compliance
• Compliant CFast specification V1.0
• CompactFlash Card Type I form-factor
• 7-pin (data) + 17-pin (power) CFast Card connector
• SATA 1.0a and SATA 2.6 specification compliance
• Support SATA I and II (1.5/3.0Gps) interface
• Data transfer compliant with ATA-7 / UDMA-5 and backward compatible
• Non-volatile memory and no moving parts
• Fixed Disk Type
• Capacity from 4GB up to 32GB
• Performance up to 87.3 MB/sec for Read & 49.6MB/s for Write
• Support BCH ECC 8 bits or 15 bits in 512bytes
• Power supply supports 3.3V
• Shock: 1,500G, compliance to MIL-STD-810F
• Vibration: 15G, compliance to MIL-STD-810F
• High performance, low power consumption
• Humidity: 10% ~ 95% non-condensing
• Altitude: 70,000 feet
• Reading Mode Current: 290mA (max)
• Writing Mode Current: 350mA (max)
• Stand-By Mode Current: 170mA (max)
• Endurance: Unlimited Read Cycles; > 2,000,000 cycles logically contributed by wear-leveling and advanced bad sector management
• Data Retention: 10 years
• Dimensions: 42:8 x 36.4 x 3.3 mm / 1.69 x 1.43 x 013 inches
• Weight: 10g / 0.4 oz