Loading... Please wait...

Emperor 800 1.8" Micro SATA SSD 8GB- 256GB

Hover over image to zoom

  • Image 1
$0.00
SKU:
Emperor 800
Availability:
Contact 714.460.9844 or support@mfactors.com
Shipping:
Calculated at checkout

 Product Description

­­­­Emperor 800 1.8" Micro SATA Solid State Drive

Emperor Disk proudly introduces the 1.8" Micro SATA solid state drive (SSD).

Emperor 800 1.8" Micro SATA SSD delivers all the advantages of Flash Disk technology with Serial ATA I/II/III interface and is fully compliant with the standard 1.8" form factor. Available capacity ranges from 8GB to 256GB. Based on Toshiba's A19nm Toggle MLC flash (with external DDRIII 256MB/512MB cache enabled and measured by CrystalDiskMark v3.0), Emperor 800 can reach up to 515MB/s read as well as 355MB/s write high performance. Moreover, the 1.8" Micro SATA SSD enables hot-swapping when removing/replacing/upgrading flash disks and provides low power consumption compared to traditional hard drives.

Offering improved Read/Write performance, SMART technology, reliability, and low power consumption, Emperor 800 1.8" Micro SATA SSD is an ideal storage for embedded systems.

HIGHLIGHTS

  • Easy installation
  • Toshiba A19nm MLC Toggle1.0 and Toggle2.0
  • Compliant with SATA Revision 3.0
  • Compatible with SATA 1.5Gbps, 3Gbps, 6Gbps interface
  • NCQ support up to queue=32
  • Supports power management
  • Supports expanded register for SATA protocol 48 bits addressing mode
  • Embedded BIST function for SATA PHY for low cost mass production
  • Supports 16k/page MLC large block NAND flash
  • Supports ONFI 3.0 and Toggle 2.0 interface: 5 channels at maximum
  • Contains 1pc to 8pcs of TSOP Flash
  • Corrects up to 72bits error in 1K Byte data
  • Supports SMART and TRIM Commands

 

 ***Optional Industrial Grade supporting -45C to 85C and SLC is available (Contact 714.460.9844 or support@mfactors.com) 

Item

Specification

Specification

Interface

SATA 6Gbps and 3Gbps, 1.5Gbps interface

ONFI 3.0 and Toggle 2.0 Interface support

Electrical 3.3V (Operating Voltage)

Form Factor

1.8" micro SATA

SIze

78.5mm*54mm*5mm

weight

~1oz/0.06lbs

Capacity

8GB~256GB (support 48bit addressing mode)

Performance

Sequential write

355 MB/s

Sequential Read

515 MB/s

Power Dissipation

Idle

295mW  

Active 

4135mW 

Dependability

TRIM 

support 

NCQ 

support 

Firmware Update 

support 

MTBF

>1,000,000 hours

S.M.A.R.T

support

Bad-Block Management

Advanced bad sector management algorithms

Wear-leveling

Static and dynamic wear-leveling algorithms

ECC

Built in hardware ECC circuit (up to 72bit/1KB)

Environment

Storage temperature

-40~85℃

Operation temperature

Standard

0~70 ℃

Industrial

-40~85 ℃

 

 

Vibration 

80Hz~2000Hz/20G 

Shock

1500G/0.5ms

Humidity

90% under 40C

TBW

Terabytes Written: 730TBW for 256GB

RoHS Compliant

Yes

Warranty

2 years

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...